| 16 EnglishConnectionsConnecting The Speakers1. Match each speaker cable bundle to the correct speaker by matching the colour codedplug on each bundle to the coloured sticker on the bottom of each speaker.2. To attach speaker wire to each speaker:a. Press down the red tab on the back of the speaker, insert the red wire, and thenrelease the tab.b. Press down the black tab on the back of the speaker, insert the black wire, and thenrelease the tab.3. Connect the speaker wire plugs from each speaker to the back of the product bymatching the colours of the speaker plugs to the colours of the speaker jacks.* In case of HT-F5500HDMSPEAKERS OUTCENTERSUBWOOFERFRONT LFRONT R,03('$1&(SURROUND R SURROUND LAUX IN FM ANTOPTICALDIGITALAUDIO INLRSPEAKERS OUTCENTERSUBWOOFERFRONT LFRONT R,03('$1&(SURROUND R SURROUND LSurround Speaker (R) Surround Speaker (L)SubwooferCentre SpeakerFront Speaker (R) Front Speaker (L)Refer to page 15 for the speakers of HT-F5550| CAUTION | If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on therear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided bythe company. Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct. Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or aliensubstances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall using the duct (hole).| NOTES | If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field. If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that usesthe 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.Black Red