Samsung HT-D5100K User Manual

EnglishSetupNOTEIf the TV you connected to the product doesnot support Movie Frame or the resolution youselected, the message “If no pictures areshown after the selection, please wait for 15seconds. And then, the resolution will bereverted to the previous value automatically.Would you like to make a selection?” appears.If you select Yes, the TV’s screen will go blankfor 15 seconds, and then the resolution willrevert to the previous resolution automatically.If the screen stays blank after you havechanged the resolution, remove all discs, andthen press and hold the STOP (@) button onthe front of the product for more than 5seconds. All settings are restored to thefactory default. Follow the steps on theprevious page to access each mode andselect the Display Setup that your TV willsupport.When the factory default settings are restored,all stored user BD data is deleted.The Blu-ray Disc must have the 24 framefeature for the product to use the Movie Frame(24Fs) mode.If both HDMI and Component jacks areconnected and you are currently viewingComponent output, the resolution is fixed to480i.HDMI Color FormatLets you set the Color space format for HDMIoutput to match the capabilities of the connecteddevice (TV, monitor, etc).auto : Automatically sets the product to theoptimum format supported by your device.yCbCr (4:4:4) : If your TV supports the YCbCrColor space via HDMI, select this to output thenormal YCbCr Color gamut.rGB (Standard) : Select RGB (Standard) tooutput the normal RGB Color gamut.rGB (enhanced) : If you have connected theproduct to a DVI display device such as amonitor, select RGB (Enhanced) to output theenhanced RGB Color gamut.✎••••Movie Frame (24 Fs)Setting the Movie Frame (24Fs) feature to Autoallows you to adjust the product’s HDMI output to24 frames per second for improved picture quality.You can enjoy the Movie Frame (24Fs) feature onlyon a TV supporting this frame rate. You can selectMovie Frame only when the product is in the HDMI1080i or 1080p output resolution modes.auto : Movie Frame (24Fs) functions work.Off : Movie Frame (24Fs) functions are off.HDMI Deep ColorLets you output video from the HDMI OUT jackwith Deep Color. Deep Color provides moreaccurate Color reproduction with greater Colordepth.auto: The product outputs video with DeepColor to a connected TV which supports HDMIDeep Color.Off : The picture is output without Deep Color.Still ModeLets you set the type of picture the productdisplays when you pause DVD playback.auto: Automatically shows the best still picturedepending on the content.Frame : Select when pausing a scene with alittle action.field : Select when pausing a scene with a lotof action.Progressive ModeLets you improve picture quality when viewing DVDs.Auto : Select to have the product automaticallyselect the best picture quality for the DVDyou’re watching.Video : Select for the best picture quality fromconcert or TV show DVDs.•••••••••