Samsung HT-D5100K User Manual

EnglishSetupInitial SettingsTurn on your TV after connecting the product.When you connect and turn on the product to aTV for the first time, the Initial Settings screenappears.Initial Settings | On-Screen Languagem Move " EnterSelect a language for the on-screen displays.Български Hrvatski ČeštinaDansk Nederlands EnglishEesti Suomi FrançaisDeutsch Ελληνικά MagyarIndonesia ItalianoPress the ▲▼◄► buttons to select the desiredlanguage, and then press the ENTER button.Press the ENTER button to select Start.Press the ▲▼ buttons to select the desired TVAspect Ratio, and then press the ENTER button.(See page 30)If you press the BLUE (D) button to skip MusicalRoom Calibration or Network Setup, you canaccess the Home menu even if the Calibration orthe Network Setup is not completed.Plug the ASC microphone into the ASC IN jackon the product. (See page 34)Press the ENTER button to select the Startbutton.Setting the Musical Room Calibration functiontakes about 3 minutes.Press the ▲▼ buttons to select the desiredNetwork Settings : Wired, Wireless(General), WPS(PBC) or One FootConnection, and then press the ENTERbutton. If you do not know the details of yourNetwork Settings, press the BLUE (D) buttonon your remote instead to skip NetworkSettings here, finish the Initial Settings, andgo to the Home menu.If you selected a Network Settings, go topages 37~40 for more information about theNetwork settings. When done, go to Step 8.The Home menu appears. (For moreinformation about the Home menu, pleasesee page 29.)1.2.3.4.5.6.7.8.Home Menud WPS(PBC)My Devices Internet SettingsVideosPhotosMusicMy ContentsFunctionNOTEThe Home menu will not appear if you do notconfigure the initial settings except as notedbelow.If you press the BLUE (D) button during theMusical Room Calibration/network setup, youcan access the Home menu even if thenetwork setup is not completed yet.If you want to display the Initial Setting screenagain to make changes, select the Resetoption. (See page 41)If you use an HDMI cable to connect theproduct to an Anynet+(HDMI-CEC)-compliant Samsung TV and 1.) You have setthe Anynet+(HDMI-CEC) feature to On inboth the TV and the product and 2.) You haveset the TV to a language supported by theproduct, the product will select that languageas the preferred language automatically.If you leave the product in the stop mode formore than 5 minutes without using it, a screensaver will appear on your TV. If the product isleft in the screen saver mode for more than 20minutes, the power will automatically turn off.•✎Setup