Samsung HT-AS600 Instruction Manual

161. Connect the FM antenna supplied to the FM75ΩCOAXIAL terminal as a temporary measure.2. Slowly move the antenna wire around until you finda location where reception is good, then fasten it toa wall or other rigid surface.1. Connect the AM loop antenna supplied to the AMand terminals.2. If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal.(Keep the AM loop antenna connected).The cooling fan dissipates the heat generated inside the unit so that the unit canbe operated normally. The cooling fan is activated automatically to supply cool airto the unit.Please observe the following cautions for your safety.• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside theunit could rise and may damage it.• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes arecovered with a newspaper or cloth, heat may build up inside the unit and fire may result.)Connecting the FM and AM AntennasFM antenna connectionIf AM reception is poor, connect anoutdoor AM antenna(not supplied).FM Antenna (supplied)AM Loop Antenna(supplied)Snap the tabs on the loop into theslots of the base to assemble theAM loop antenna.COOLING FANAM antenna connectionCONNECTIONSConnecting External ComponentCD PlayerBefore moving or installing the product, be sure to turn off the power and disconnect the power cord.Connecting Audio Component15