pg. 17…MU-2300 Specifications continuedRear Panel ComponentsPower 3.5mm Phoenix 2-pin connector with retention screws for 12vdc inputLAN Port RJ-45 10/100 BASE-T for Ethernet communicationAuto MDI/MDI-XDHCP ClientICSLan Port RJ-45 10/100 BASE-T for Ethernet communicationAuto MDI/MDI-XDHCP serverProvides isolated control networkRS-232/422/485 Port 1 3.5mm Phoenix 10-pin connector• 12VDC @0.5A• RX- Balanced line input for RS-422/485• RX+ Balanced line input for RS-422/485• TX- Balanced line output for RS-422/485• TX+ Balanced line output for RS-422/485• RTS Ready to Send for Hardware Handshaking• CTS Clear to Send for Hardware Handshaking• TXD Unbalanced line output for RS-232• RXD Unbalanced line input for RS-232• GND – Signal ground for RS-232RS-232 Ports 2-4 3.5mm Phoenix 5 pin connector• RTS Ready to Send for Hardware Handshaking• CTS Clear to Send for Hardware Handshaking• TXD Unbalanced line output for RS-232• RXD Unbalanced line input for RS-232• GND – Signal ground for RS-232Relays 1-4 3.5mm Phoenix 8 pin connector4 pairs – Contact Closure output for Normally Open contactIR 1-4 3.5mm Phoenix 8 pin connector4 pairs – IR/Serial output + groundI/O 1-4 3.5mm Phoenix 6 pin connector• 12VDC @0.5A• 4x I/0 pins configurable as Analog In, Digital In, or Digital Out• GroundUSB Host Port 2x Type-A USB host port• USB Mass Storage – for external logging• FLIRC – IR Receiver for IR hand control inputGeneral Specifications:Operating Environment • Operating Temperature: 32° F (0° C) to 122° F (50° C)• Storage Temperature: 14° F (-10° C) to 140° F (60° C)• Operating Humidity: 5% to 85% RH• Heat Dissipation (On): 10.2 BTU/hrIncluded Accessories • 1x 2-pin 3.5 mm mini-Phoenix PWR connector• 1x 6-pin 3.5 mm mini-Phoenix I/O connector• 1x 10-pin 3.5mm mini-Phoenix RS232/422/485 connector• 3x 5-pin 3.5mm mini-Phoenix RS232 connectors• 2x CC-NIRC, IR Emitters (FG10-000-11)• 2x removable rack ears