Samsung EO-BG920 User Manual

Also see for EO-BG920: User manual Quick start guide

Connecting via Bluetooth11Connecting additional devicesThe headset can connect to up to two Bluetooth-enabled devices at the same time. Whenyou connect the headset to two devices, the last device you connect is recognized as theprimary device. The other device is recognized as the secondary device.1 Connect the headset to a device via Bluetooth.2 Press and hold the Multifunction button for three seconds to re-enter Bluetooth pairingmode.The first device will be disconnected.3 Connect the headset to a second device.4 Reconnect the headset to the first device.This feature may not be supported on some devices.Reconnecting or disconnecting the devicesReconnecting the devicesWhen your headset is disconnected from the device due to the distance between the devices,bring the devices closer together to pair them again.If the connection is lost due to a problem with the connected device, press the Multifunctionbutton on the headset. You can also access the Bluetooth menu on the connected device topair them again.Disconnecting the devicesPress and hold the Multifunction button for three seconds. Then, the connection ends andthe headset enters Bluetooth pairing mode.You can also end the connection by turning off the headset. When you turn on the headsetagain and the devices are in range, the headset automatically connects with the mostrecently paired device.English(USA)9