9Choose one of the three methods for connecting to a TV.10CONNECTIONSWhat is Dolby Pro Logic?Using five speakers, it recreates the original sound ofthe music or audio and provides the sense ofpresence, as if you were in a movie theater or concerthall.AMPLIFIER• When playing a DTS disc, no sound is produced. In such case, use an amplifier equipped with a DTSdecoder.• When playing back a 5.1 channel encoded DVD, sound is output from the center and rear speakers only.• When playing back a 2 channel encoded DVD, CD, tape, or tuner, no sound is output from the centerand rear speakers.NoteConnecting the Video Out to TV Connecting to an amplifier with Dolby Pro Logic support.Connection for better soundMETHOD 2 Scart ............... Good QualityIf you television is equipped with an SCART input, connect an Scart Jack (not supplied) from theAV OUT jack on the back panel of the system to the SCART IN jack on your television.METHOD 1 Composite Video ............... Good QualityConnect the supplied video cable from the VIDEO OUT jack on the back panel of thesystem to the VIDEO IN jack on your television.METHOD 3 Component (Progressive Scan) Video ............... Better QualityIf your television is equipped with Component Video inputs, connect a component videocable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to thecorresponding jacks on your television.• This product operates in Progressive scan mode(480p Only) for Component Output.• If the TV only supports a resolution of 576i(480i), the screen may be divided into 2screens, or display nothing.NoteVIDEO SELECT FunctionPress and hold VIDEO SEL. button on the remote control for over 5 seconds.• "COMPOSITE" or "RGB" will appear in the display.At this time, press the VIDEO SEL. button shortly to select between "COMPOSITE" and "RGB".• If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode.You can get a better picture quality by using Scart setting.• If Scart (RGB Input) is not equipped for your TV, press VIDEO SEL. button to select COMPOSITE mode.METHOD 1METHOD 3METHOD 2