Samsung DV8 T 2 Series User Manual

Also see for DV8 T 2 Series: User manual User manual User manual User manual User manual

EnglishEnglish 7Heat pump model only: The instructions shall also include the substance of thefollowing:WARNING: In the appliance enclosure or in the built-in structure, keepventilation openings clear of obstruction.WARNING: Do not damage the refrigerant circuit.Critical installation warningsWARNINGThe installation of this appliance must be performed by a qualified technician or service company.• Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury.Plug the power cord into a wall socket and use the socket for this appliance only. In addition, do not use anextension cord.• Sharing a wall socket with other appliances using a power strip or extending the power cord may resultin electric shock or fire.• Ensure that the power voltage, frequency and current are the same as those of the productspecifications. Failure to do so may result in electric shock or fire. Failure Plug the power plug into thewall socket firmly.Remove all foreign substances such as dust or water from the power plug terminals and contact pointsusing a dry cloth on a regular basis.• Unplug the power plug and clean it with a dry cloth.• Failure to do so may result in electric shock or fire.Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous tochildren.• If a child places a bag over its head, it may result in suffocation.This appliance must be properly grounded.Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.• This may result in electric shock, fire, an explosion, or problems with the product• Never plug the power cord into a socket that is not grounded correctly and make sure that it is inaccordance with local and national codes.Do not install or keep the product exposed to the outdoor elements.Do not use a damaged power plug, damaged power cord or loose wall socket.• This may result in electric shock or fire.If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service agent or asimilar qualified technician in order to avoid a hazard.This appliance should be positioned to be accessible to the power plug after installation.Do not pull or excessively bend the power cord.Do not twist or tie the power cord.U-PJT_DRYER_SimpleUX_WEB_SSEC-00_EU_English.indd 7 2021/11/9 17:26:25