Samsung DV40J3000G Series User Manual

Also see for DV40J3000E Series: User manual Manual User manual

English - 7installing your dryerunpackInG your DryErUnpack your dryer and inspect it for shipping damage. Make sure you have received all of the itemsshown below. If your dryer was damaged during shipping, or you do not have all of the items, contact1-800-SAMSUNG (726-7864).To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the dryer.Certain internal parts are intentionally not grounded and may present a risk of electric shock onlyduring servicing.Service Personnel - Do not contact the following parts while the appliance is energized: Control boardand inlet valve.Packing materials can be dangerous to children. Keep all packing material (plastic bags, polystyrene,etc.) well out of children’s reach.Do not move the product while holding the front part of the top cover of the dryer.- This may cause the cover to be separated and result in injury.required accessories and toolspliers cutting knife pipe wrench (gas only) nut driverslevel phillips screwdriver duct tape Wrench 3/8” female-male nipplebaSIc rEquIrmEntSMake sure you have everything necessary for proper installation• A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.• A POWER CORD for electric dryers (except in Canada).• GAS LINES (if installing a gas dryer). The gas lines must meet national and local codes.• EXHAUST SYSTEM - must be rigid metal or flexible stiff-walled metal exhaust ducting.top covercontrol paneldoorFrame FrontFilter duct exhaust[ bacK ]WarningcautionWarning01 installing your dryerDV3000J_DC68-03170N-10_EN.indd 7 2019/6/15 10:12:43