Samsung DV40J3000G Series User Manual

Also see for DV40J3000E Series: User manual Manual User manual

English - 12installing your dryerElEctrIcal rEquIrEmEntSThe Wiring diagram is located on the plate below the control panel or frame back.• Improperly connecting the equipment grounding conductor can result in a risk of electric shock.Check with a qualified electrician or serviceman if you are in doubt as to whether your dryer isproperly grounded. Do not modify the plug provided with your dryer – if it doesn’t fit the outlet,have a proper outlet installed by a qualified electrician.• To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and groundingmust be done in accordance with local codes, or in the absence of local codes, with the NationalElectrical Code, ANSI/NFPA No. 70-Latest Revision (for the U.S.) or the Canadian Electrical CodeCSA C22.1 – Latest Revisions and local codes and ordinances. It is your responsibility to provideadequate electrical services for your dryer.• All gas installations must be done in accordance with the national Fuel Code ANSI/Z2231 – LatestRevision (for the U.S.) or CAN/CGA – B149 Installation Codes – Latest Revision (for Canada) andlocal codes and ordinances.GrounDInGThis dryer must be grounded. In the event of malfunction or breakdown, the ground will reduce the risk ofelectrical shock by providing a path of least resistance for the electrical current.Gas modelsYour dryer has a cord with an equipment-grounding conductor and a grounding plug.The plug must be plugged into an appropriate outlet that is properly installed and grounded inaccordance with all local codes and ordinances.Do not modify the plug provided with your dryer – if it doesn’t fit the outlet, have a proper outletinstalled by a qualified electrician.Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.Electric modelsYour dryer has an optional cord with an equipment-grounding conductor and a grounding plug,This cord is sold separately.The plug must be plugged into an appropriate outlet that is properly installed and grounded inaccordance with all local codes and ordinances.Do not modify the plug provided with your dryer – if it doesn’t fit the outlet, have a proper outletinstalled by a qualified electrician.If a power cord is not used and the electric dryer is to be permanently wired, the dryer mustbe connected to a permanently grounded metal wiring system, or an equipment groundingconductor must be run with the circuit conductors and connected to the equipment groundingterminal or lead on the dryer.WarningWarningWarningDV3000J_DC68-03170N-10_EN.indd 12 2019/6/15 10:12:43