Menu
Samsung DV40J3000E(G) SERIES User Manual
Also see for DV40J3000EG Series: User manualUser manual
                                                                                                            |
English - 28probleM soluTionShuts off before load is dry • The dryer load is too small. Add more items or a few towels andrestart the cycle.• The dryer load is too large. Remove some items and restart the dryer.lint on clothes • Make sure the lint filter is cleaned before every load. With some loadsthat produce high amounts of lint, it may be necessary to clean thefilter during the cycle.• Some fabrics are lint producers (for example, a fuzzy white cottontowel) and they should be dried separately from clothes that are linttrappers (for example, a pair of black linen pants).• Divide larger loads into smaller loads for drying.• Check pockets thoroughly before washing and drying clothes.Garments still wrinkled afterWrinkle release • Small loads of 1 to 4 items work best.• Load fewer garments. Load similar-type garments.odors remain in clothingafter air fluff. • Fabrics containing strong odors should be washed in a normal cycle.InformatIon coDESIf an information code occurs, first all 8 LEDs turn ON and next the corresponding LED will be blinked whileit happens.informationcodeTemp. dry Timeextralow low Medium high 20 min 40 min 60 min 80 mindc oac obc2 oTc2 odF ohc o9c1 oFc o oinForMaTioncode display Meaning soluTionTc The thermistor resistance is very lowor high. Clean the screen or vent.If the problem continues, call for service.hc Invalid heating Temp in running thedryer). Call for service.dc Running the dryer with door open. Close the door and then restart.If the problem continues, call for service.Fc Invalid power source Frequency. Try restarting the cycle.If the problem continues, call for service.9c1 Electronic Control Problem(Invalid Voltage).Call for service.ac Electronic Control Problem(Invalid Communication). Call for service.dF Invalid door. Call for service.bc2 Electronic Control Problem(Button Key Input Check).Call for service.For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).troubleshooting |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved