Samsung DV 60M9900 Series Service Manual

15 _ Removal and ReassemblyPart Figure DescriptionRemoval ASSYDUAL MODULE1. Remove 4 screws on backside of dryer2. Remove 2ea of CAP SCREW and screws on PANEL3. Pull PANEL CONTROL forward4. Disconnect all connections and remove PANELCONTROL5. Open the door and remove 8 screws as shown6. Close the door7. Tilt Frame front forwardNote)If you remove Frame front with door-opened, it candamage dryer or wire8. Remove DOOR SWITCH housing.9. Remove FRAME FRONT by pull shown direction.NoteDo not lay FRAME FRONT on floor, it may damage door“This document can not be used without Samsung's authorization”SAMSUNGPROPRIETARY.DONOTCOPYORDISTRIBUTEWITHOUTPERMISSIO