Samsung DMS300TR User Manual

16_ setting up your dishwashersetting up your dishwasherConTroL PAneLpROGRAmSeleCTORYou can select the appropriate wash program depending on the soil level ofyour dishes. When a program is selected, the indicator for that program is lit.dISplAyDisplays the remaining wash time, the wash information (Delay start, Salt refill,Rinse refill, Child lock), and error messages.If an error occurs during an operation, an error message is displayed with awarning sound. Refer to the information in the “Troubleshooting” section.plus+ Use the plus+ button to add the drying and rinse cycles to the originalcourse. If the program has already started, this button is deactivated.1/2For small loads, only use the top or bottom basket to save energy. Press thebutton repeatedly to select the top or bottom basket where you load yourdishware.STeRIlIZATIONPress this button to use the sterilization function by increasing the heat by 80degrees during the final rinse cycle.This function is only available when selecting the Normal, Pots&Pans, Eco, orRinse Dry courses or the 4 in 1 function.ChIld lOCKThe Child Lock function allows you to lock the buttons so that the wash cycleyou’ve chosen can’t be changed.If you want to activate or deactivate the Child Lock function, press theSterilization button for 3 seconds. All buttons will be locked and “L” will bedisplayed when this feature is activated.4 in 1If you want to use multi-functional detergent such as “2 in 1”, “3 in 1”, and“4 in 1” detergent, select a program and then press this button. (The 4 in 1function is only available when selecting the Normal, Eco, Pots&Pans, Crystaland Quick programs.)Though the “Rinse Refill” indicator is lit while the 4 in 1 function is activated,you do not have to add rinse detergent to the rinse aid dispenser.delAy STARTUse the delay Start button to preset the start time. The indicator changeseach time the button is pressed. The delay start time can be adjusted from 1hour to 24hours.321845671 2 3 4 5 6 7 8 9 10