10_ setting up your dishwashersetting up your dishwasherADjusTInG The LeveLUnfasten the adjusting nuts of the legs.Rotate the legs to adjust the height.If the ground surface is too uneven, please contact a qualifiedservice technician.freesTAnDInG TyPe InsTALLATIon1. Connect the power cord after the dishwasher is installed.2. Do not repair, replace, or fix the part yourself. Disassembling, repairing or modifying the product isonly permitted by an authorized service technician.3. This dishwasher is intended for domestic use only.4. Turn off the water supply before installing the dishwasher.5. Please to read the reference section before installing the dishwasher.ToolsElectric Screwdriver Adjustable wrenchAccessoriesa. Pinthfacia Lower Rubber (Protective panel)1 pcs (598 x 30)(Model: DMS500TR)b. PU Foam Tape 1 pcs (600 x 10 x 5)(Model: DMS500TR)c. Screws – TRS (4 x 12) 3 pcs d. Cable Clamp 3 pcs e. Cable Tie 2 pcshigherlevelerlowerWARNING