Samsung DCS EURO SERIES 24 User Manual

T E L E C O MFOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UK2. Press the MSG key or dial 43. The first extension that left you a message will be called automatically. Ifthat extension does not answer, your message light will stay on.3. Repeat step 2 until all messages have been returned in the order they were received.Your MSG key LED will turn off when all messages have been returned.Note: You can first view message indications and return them in the order you choose. See ViewingMessage Indications under Display Features. If the Hot Keypad feature has been turned off, you mustfirst lift the handset or press the SPEAKER key before you begin dialling. If a message has been left atyour keyset by a keyset in Auto Answer mode, you must manually cancel the message after it has beenreturned.Programmed MessagesWhen you plan to be away from your phone for any length of time, you can leave a programmed stationmessage on your phone’s display (e.g. In a Meeting). Display keysets calling you will also see thismessage. The message may also contain instructions for callers to follow. There are 20 possiblemessages (01–20). Messages 01–10 are set up by default as follows:01. IN A MEETING02. OUT ON A CALL03. OUT TO LUNCH04. LEAVE A MESSAGE05. PAGE ME06. OUT OF TOWN07. IN TOMORROW08. RETURN AFTERNOON09. ON VACATION10. GONE HOMEMessages 11–20 are blank for new messages.Note:All programmed messages (01–20) can be changed by reprogramming the system. Therefore, some orall of the messages shown above may be different on your system. To find out what your messages are,follow the procedure below. If necessary, ask your system administrator to set up specific messages youmight require.To set a message:• Dial 48 followed by a message code 01–20.To cancel this message:• Dial 48 followed by 00.Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKERkey before you begin dialling. You may also have several programmed message (PMSG) keys, each