Samsung DCS EURO SERIES 24 User Manual

T E L E C O MFOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UKIf you want a specific extension’s calls forwarded to your station(called ‘Remote Call Forward’):1. Dial 605 followed by the desired extension number.2. When you receive confirmation tone and LCD message, hang up.Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKERkey before you begin dialling.Forward To An External NumberTo forward outside calls to another outside number, you can use the FWD EXTERNAL key programmedon your keyset with the required external number to forward to. Simply press this key to set forwarding(the LED lights and the message is displayed), and press it again to turn forwarding off.However, if you do not have this key programmed:1. While on-hook, press the TRSF key and dial 102.2. Dial 5.3. Dial the trunk or trunk group access code followed by the outside number that you want.4. Press the TRSF key.To turn forwarding off, dial 600.Note:• External Call Forward will cancel all other call forwarding instructions.• If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER keybefore you begin dialling.Extension Call PickupTo pick up (answer) a call ringing at another extension, lift the handset and dial 65 followed by theextension number of the ringing phone.Note: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER key before you begin dialling.Group Call PickupTo pick up (answer) a call ringing in any pickup group, lift the handset and dial 66 followed by thedesired group number, or press the flashing GROUP PICKUP key if available.Note:• Group numbers for each system type are: DCS and Compact II=01–20; 816=01–08; 408/408i=01–04.• A group pickup key can have an extender for a specific pickup group (see Adding Extenders to KeyAssignments under Display Features).• If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER keybefore dialling the access code.• Extension and group pickup features cannot be used to answer recalls to an extension, only newringing calls and operator recalls.