Samsung DCS-816 System Administration And Special Features Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

SAMSUNG System Administration and Special Features GuideDCS-816 March 19993 - 14PROGRAM KEYSUP & DOWN Select optionKEYPAD Used to enter extender codes.HOLD Used to clear the displayed data.Open customer programming and follow the instructions below.ACTION DISPLAY1. Select 107 [201] KEY EXTEND01 : CALL12. Dial the station number (e.g., 205)OR use UP or DOWN to scroll through the station[205] KEY EXTEND01 : CALL1numbers and press the right soft key to move the cur-sor3. Enter the key number (e.g., 18)OR use UP and DOWN to scroll through the keys and[205] KEY EXTEND18 : DSuse the right soft key to move the cursorOR press the key to be programmed4. Dial the extender according to the list above and thesystem displays your selection. If there are no more[205] KEY EXTEND18 : DS207entries, press the left soft key to return to step 25. Press TRSF to store and exit programmingOR press SPEAKER to store and advance to the nextprogram3.15 PROGRAMMING ACCOUNT CODES [MMC 708]This program is used to add or change account code entries.PROGRAM KEYSKEYPAD Used to enter the account code (allowable digits 0-9).UP & DOWN Used to select entry number.FLASH & TRSF Used to view and change only the used entries.HOLD Used to clear data.Open customer programming and follow the instructions below.