Samsung DCS-816 System Administration And Special Features Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

SAMSUNG System Administration and Special Features GuideDCS-816 March 19993 - 10selected4. Dial the speed dial location (e.g., 05)OR use UP or DOWN to scroll through the location[205] SPEED NAME01 : _numbers and use the right soft key to move the cursorOR press the left soft key to return to step 25. Enter the name using the procedure in 3.4 ProgramStation Names[205] SPEED NAME01 : SAM SMITHIf you make an error, press HOLD to clear an entire entryor use the DOWN key to step back one character6. Press the F key to access 3.9 Program PersonalSpeed Dial Numbers For Other StationsOR press the left soft key to return to step 4OR press the right soft key to return to step 2OR press TRSF to store and exit programmingOR press SPEAKER to store and advance to the nextprogram3.11 ASSIGN SPEED DIALLING BLOCKS [MMC 606]Your system can have up to 500 speed dial entries assigned (50 blocks of 10 numberseach). Up to 200 of these (20 blocks) can be allocated as system speed dials, and the re-mainder allocated to keysets as personal speed dials. Consequently, the more systemspeed dials that are allocated, the fewer speed dials are available for personal use.When assigning speed dials, this MMC displays the number of system or personal blocksthat are currently assigned and also shows the number remaining to be assigned, calledthe ‘Free List’. This program also allows you to delete blocks of speed dial if required.PROGRAM KEYSUP & DOWN Used to scroll through options.KEYPAD Used to enter selections.SOFT KEYS Move cursor left and right.SPEAKER Used to store data and advance to next program.HOLD Used to clear previous entry.Open customer programming and follow the instructions below.