Connecting to a Video Device• Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable.• You can connect a video device to the product using a cable.― Connecting parts may differ in different products.― Press the SOURCE button on the remote control to change the source.Connection Using an HDMI-DVI Cable― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. Toresolve this, additionally connect an audio cable to the audio ports on the product and video device.When you connect a video device to the product using an HDMI-DVI cable, set Edit Name to DVIDevices to access video and audio content stored on the video device.― Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.HDMI IN(DVI)AUDIO INConnection Using an HDMI CableUsing an HDMI cable or HDMI to DVI Cable (up to 1080p)• For better picture and audio quality, connect to a digital device using an HDMI cable.• An HDMI cable supports digital video and audio signals, and does not require an audio cable.- To connect the product to a digital device that does not support HDMI output, use an HDMI-DVI and audio cables.• The picture may not display normally (if at all) or the audio may not work if an external device thatuses an older version of HDMI mode is connected to the product. If such a problem occurs, ask themanufacturer of the external device about the HDMI version and, if out of date, request an upgrade.• Be sure to use an HDMI cable with a thickness of 14 mm or less.• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connectionerror may occur.• A basic high-speed HDMI cable or one with ethernet is recommended.This product does not support the ethernet function via HDMI.HDMI IN(DVI)
