Power ControlMENU m → System → Power Control → ENTER EPower ControlAuto Power OnMax. Power SavingStandby ControlPower ButtonNetwork StandbyOffOnAutoPower on onlyOff- The displayed image may differ depending on the model.Auto Power OnThis feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.• Off / OnMax. Power SavingTurns off the product to reduce power consumption after the PC has been left idle for a specified period of time.• Off / OnStandby ControlYou can set the screen standby mode to be applied when an input signal is received.• AutoPower-saving mode will activate if no input signals are detected even though a source device is connected to the display.The message No Signal will appear if no source device is connected.• OffThe message No Signal will appear if no input signals are detected.― If No Signal is displayed although a source device is connected, check the cable connection.― If No Signal Message is set to Off,the No Signal message does not appear.If this is the case, set No Signal Message to On.• OnPower-saving mode will activate if no input signals are detected.
