24▪ Do not disconnect the power or remove the USB drive while an upgrade is being applied. The main unitwill turn off automatically after completing the firmware upgrade.▪ When software is upgraded, settings you have made will return to their default (factory) settings.We recommend you write down your settings so that you can easily reset them after the upgrade.▪ If the firmware fails to upgrade, we recommend formatting the USB drive in the FAT16 format and thentrying again.▪ For upgrading purposes, do not format the USB drive in NTFS format. It is not a supported file system.▪ Depending on the manufacturer, the USB may not be supported.▪ Disconnect the Wireless Audio with Dock from the Internet and any external devices before you upgradethe software.▪ You cannot charge other external devices through this USB port.▪ Refer to the Upgrade Guide from the website.softWare UPgrade (onLy UsB Mode)1. Visit www.samsung.com.2. Click SUppORt on the top right of the page.3. Enter the product's model number into the search field, and then click Findproduct.4. Click get downloads in the Center of the page below the Downloads header.5. Click Firmware in the Center of the page.6. Click ZIp file icon of the upgrade file.7. Once popup window appears, click OK and continue to download and saveupgrade file onto your PC.8. Uncompress downloaded .zip file into a certain folder of your PC.9. Copy all files in the folder to the USB flash drive’s root directory.• Upgrading allows only one file set for upgrading at a time.10. Touch the button on the front panel of the Wireless Audio with Dockrepeatedly until the icon appears in the display. Insert the USB drive intothe USB port on the back panel of the unit.11. The LED will blink during the Software update process. The product will turn off automatically after completingthe firmware upgrade.• It may take longer depending on the functions to upgrade. (Maximum 10 minutes)• Turn on the product again.ONLY FORSERVICEAUX INDC 14V 4A USB5V 500mAONLY FORSERVICEAUX INDC 14V 4A USB5V 500mA