CNF24 User Guide© SAMSUNG Electronics Co., Ltd. 49Join Meet-Me Conference1. Dial Meet-Me Feature key or codeSettings for internal and external user are different as shown below.y Internal userThere are two ways to start Meet-Me join flow.Æ Assign key to station user in DM 4.9.2.Select MJOIN key.Æ Assign feature code value in DM 2.8.0.Dial MJOIN feature code.y External userÆ Set DID routing table in DM 3.2.3 to allow external user to joinMeet-Me conference.(1) Assign feature code value in DM 2.8.0. (ex. 88)(2) Input specific digits as Incoming digits in DM 3.2.3. (ex. 200)(3) Input MJOIN feature code as its Ring Plan in DM 3.2.3.Figure 4.6 MJOIN Feature Code2. Dial Conference IDParticipant hears announcement which requests to dial conference ID.Participant should dial conference ID following examples below.y Conference ID (xxx) + End Digit (‘#’)Æ 4 digits (Simple way)Æ User will join the conference as an Anonymous.y Conference ID (xxx) + Member Login Index (yy) + End Digit (‘#’)Æ 6 digits.Æ Member Login Index can be 00 to 99. If user dials 99 as member
