Samsung CNF24 User Manual

Also see for CNF24: Technical manual User guide

Contents

CNF24 User Guide© SAMSUNG Electronics Co., Ltd. 11Front View of CNF24The front view of the CNF24 is shown in the figure below:Figure 1.1 Front View of the CNF24The components on the front panel of the CNF24 are listed in Table 1.1.Table 1.1 Ports and LEDs of the CNF24Ports, LEDs FunctionsLAN Ethernet port that connects to the LAN.- Connector: RJ45- Cable: CAT 5 cable, UTPSIO UART port (for tests).RST Button for resetting the CNF24.RUN LED This LED indicates CNF24 status.- Off: Power is not being supplied.- On: Booting.- Blink: The RAM program is operating.SVC LED This LED indicates if the CNF24 service is available.This LED turns on when the CNF24 software task can beaccessed.- Red blink: CNF24 service is not available- Green blink: CNF24 service availableLAN LED This LED indicates the status of the Ethernet link- Red: Linked as 10 BASE-T Ethernet mode- Red blink: Transmitting/receiving data as 10 BASE-T- Green: Linked as 100 BASE-T Ethernet mode- Green blink: Transmitting/receiving data as 100 BASE-T- Orange: Linked as 1000 BASE-TX Ethernet mode- Orange blink: Transmitting/receiving data as 1000 BASE-TX- Off: Link offMC LED - Green blink: Auxiliary memory (NAND) is accessed.- Off: No accessRSTCNF24LAN SIORUN SVC LANCONFMCREC MEM BACKUP