Samsung CLX-9250ND Administrator's Manual

Also see for CLX-9250ND: Service manual Installation guide Brochure & specs Service manual

2 SafeCom Go SamsungD60719-07 112.2 SafeCom Go Samsung software installation2.2.1 Uninstall earlier version of SafeCom Go SamsungIf a device has SafeCom Go Samsung version S94 010.010*06 installed, uninstallbefore proceeding with the new software installation.2.2.2 How to1. Make sure the printer is powered on and ready.2. In SafeCom Administrator click the server on which to log in.3. Enter User logon (default is ADMIN) and device Password.4. Browse to Devices click the Add device button and the Add devicewizard is launched.5. Enter the Device address (hostname or IP address). Click Next.6. Information is retrieved from the device to establish the type of device.Click Next.7. The Add device dialog opens. Specify on the Settings tab the propertiesof the device (Duplex supported and Color supported).8. Click Add to register the device and save it in the database.9. In the Update software dialog, browse to the SafeCom Go Samsungsoftware file (*.b94) (2.7.1).10. Click Send.11. The Device authorization dialog opens. Enter User name admin and thedevice Password. Click OK.Note: If you enter the wrong password you get the message:" Error in HTTP response! cc = 401"You have entered the wrong password. Wait three minutes before tryingagain. During this period it is not possible to login to the device page.12. Click Close when the software update process is completed.13. A dialog opens with the message ”Attempt to configure the device failed.You must configure the device manually”. Proceed to step 14 tocomplete manual configuration14. After 1-2 minutes, login to the device web page of the A3 model (2.3) orA4 model (2.4) to complete configuration.Note: You can also install SafeCom Go software from the device web page. OnA3 devices click Maintenance in the upper menu, and then select Applicationmanagement in the left menu. On A4 devices click theNetwork/Security/Maintenance button, and then select Maintenance in theupper menu.