Samsung C61RA Series User Manual

Also see for C61R1AAMST: Service manual Nstallation and operating instructions

11ENInstalling the Hob (Continued)Connecting to the mains power supplyBefore connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the ratingplate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob.Shut off power to circuit before connecting wires to circuit.The heating element voltage is AC 230 V~. The appliance also works perfectly on older networks with AC220 V~.The hob is to be connected to the mains using a device that allows the appliance to be disconnected from themains at all poles with a contact opening width of at least 3 mm, eg. automatic line protecting cut - out, earthleakage trips or fuse.A type H05SS - F (180 °C) cable or one of a higher grade must be used as the mains connecting cable.Rated current of appliance (A) Nominal cross-sectional area (mm2)1N~ > 25 and ≤ 32 ≥ 2.52N~ > 10 and ≤ 16 ≥ 1.5The connection must be carried out as shown in the diagram. The connecting links should be fitted accordingto the appropriate connection diagram.The earth lead is connected to terminal. The earth lead must be longer than leads carrying electric current.The cable connections must be made in accordance with regulations and the terminalscrews tightened securely.The connecting cable is to be secured with the mains cable cleat and the covering closed by pressing firmly(locking into place). Before switching on for the first time, any protective foil or stickers must be removed fromthe ceramic glass surface.Once the hob is connected to the mains supply, check that all cooking zones are readyfor use by briefly switching each on in turn at the maximum setting.When the hob is powered on for the first time, all displays light and the child safety lockis activated.< IN ~ >L: BrownN: BluePE: GreenWarning: Pay attention (conformity) to phase and neutral allocation of houseconnection and appliance (connection schemes); otherwise, components can bedamaged.Warranty does not cover damage resulting from improper installation.C61R2AEEP_BOL_DG68-00125D-04_EN_161107.indd 11 2016-11-07 �� 10:57:08