Connecting to a Network RouterYou can connect your player to your network router using one of the methodsillustrated below.To use the DLNA network functionality, you must connect your PC to your networkas shown in the illustration.The connection can be wired or wireless.Wired NetworkBroadbandserviceBroadbandserviceBroadband modem(with integrated router)BroadbandmodemRouterOr✎ NOTES` Internet access to Samsung's software update server may not be allowed, depending on the router you useor your ISP's policy. For more information, contact your ISP (Internet Service Provider).` DSL users, please use a router to make a network connection.Wireless NetworkWireless RouterBroadband service✎ NOTES` If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to thewireless network.` Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.` The player supports only the following wireless security key protocols:- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),WPA2-PSK (TKIP/AES)` Select a channel on the wireless router that is not currently being used. If the channel set for the wirelessrouter is currently being used by another device nearby, it will result in interference and communicationfailure.` If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your routerto WEP, TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with new Wi-Fi certification specifications.` Wireless LAN, by its nature, may cause interference, depending on the operating conditions (routerperformance, distance, obstacles, interference by other radio devices, etc).9