Samsung BD-H6500 User Manual

Also see for BD-H6500: User manual User manual User manual User manual User manual

24 EnglishSettings| NOTE |\ The upgrade is complete when the product turns off, andthen turns on again by itself.\ Samsung Electronics shall takes no legal responsibilityfor product malfunction caused by an unstable Internetconnection or consumer negligence during a softwareUpdate.\ If you want to cancel the upgrade while the upgradesoftware is downloading, press the v button.\ When a system upgrade is in progress, "UPDATE" isdisplayed on the front panel.Update NowYou can use Update Now to update the softwarethrough your network connection or by using aUSB flash drive. The network instructions arebelow. The USB flash drive instructions are on thenext page.1. Select Update Now, and then press the vbutton.The Update now pop-up appears.2. The product searches on line for the latestsoftware version.3. If it finds a new version, the Update Requestpop-up appears.4. Select OK. The product upgrades thesoftware, turns off, and then turns onautomatically.5. If you do not select OK or Cancel in oneminute, the product stores the new upgradesoftware. You can upgrade the software laterusing Auto Update.6. If you select Cancel, the product cancels theupgrade.| NOTE |\ When the system upgrade is done, check the softwaredetails in the Product Information section of the ContactSamsung screen.\ Do not turn off the product during the Software Update. Itmay cause the product to malfunction.Auto UpdateYou can set the Auto Update function so that theproduct downloads new upgrade software when itis in Auto Update mode.In Auto Update mode, the product is off, butits Internet connection is active. This allowsthe product to download upgrade softwareautomatically, when you are not using it.1. Press the ▲▼ buttons to select AutoUpdate, and then press the v button.2. Select On. Then the product will be updatedautomatically after power off. If it downloadsnew upgrade software, the product will askyou if you want to install it when you turn theproduct on.| NOTE |\ To use the Auto Update Mode Upgrade function, yourproduct must be connected to the Internet.Update by USBTo upgrade by USB, follow these steps:1. Visit www.samsung.com.2. Click SUPPORT on the top right of the page.3. Enter the product's model number into thesearch field. As you enter the model number,a drop down will display products that matchthe model number.4. Left click your product's model number in thedrop down list.5. On the page that appears, scroll down to andthen click Firmware Manuals & Downloads.6. Click Firmware in the Centre of the page.7. Click the ZIP button in the File column on theright side of the page.8. Click Send in the first pop-up that appears.Click OK in the second pop-up to downloadand save the firmware file to your PC.Downloaded From Disc-Player.com Samsung Manuals