ConnectionsConnecting to a TVConnect an HDMI cable (not supplied) from the HDMI OUT jack on the back of theproduct to the HDMI IN jack on your TV.- Do not connect the power cord to the wall outlet until you have made all the otherconnections.- When you change the connections, turn off all devices before you start.AudioVideo✎ NOTES■ If you use an HDMI-to-DVI cable to connect to your display device, you must alsoconnect the Digital Audio Out on the player to an audio system to hear audio.■ An HDMI cable outputs digital video and audio, so you don't need to connect anaudio cable.■ Depending on your TV, certain HDMI output resolutions may not work. Pleaserefer to the user manual of your TV.■ When you connect the player to your TV using the HDMI cable or to a new TV,and then turn it on for the first time, the player automatically sets the HDMIoutput resolution to the highest supported by the TV.■ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color toOff in the menu.■ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use aHigh speed HDMI cable.■ HDMI outputs only a pure digital signal to the TV.If your TV does not support HDCP (High-bandwidth Digital Content Protection),random noise appears on the screen.Connecting to an Audio SystemYou can connect the Blu-ray player to an audio system using one of the methodsillustrated below.- Do not connect the power cord to the wall outlet until you have made all the otherconnections.- When you change the connections, turn off all devices before you start.Method 1 Connecting to an HdMI supported AV receiver● Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of theproduct to the HDMI IN jack on your receiver.● Best quality (Recommended)Method 2 Connecting to an AV receiver with dolby digital or a dTS decoder● Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Outjack on the product to the Digital Coaxial In jack of the receiver.● Good quality● You will hear sound only through the front two speakers with Digital Output set toPCM.AudioAudioMethod 2Method 18