Samsung BD-H5900 User Manual

Also see for BD-HM57C: User manual

Contents

Ğ Wireless - Automatic1. In the Home screen, select Settings,and then press the v button.2. Select Network, and then press the vbutton.3. Select Network Settings, and thenpress the v button.4. Select Wireless in the Network Settingsscreen, and then press the v button.The player searches for and thendisplays a list of the available networks.m Move " Select ' ReturnNetwork SettingsSelect your network type.Network type WirelessWireless networkAdd Network you can connect your Blu-rayplayer to the internet. pleaseselect which wireless networkto use.WpS(pBC) Search5. Select the desired network, and thenpress the v button.6. On the Security screen, enter yournetwork's Security Code or Pass Phrase.Enter numbers directly using thenumber buttons on your remotecontrol. Enter letters by selecting aletter with an arrow button, and thenpressing v button.7. When finished, select done and thenpress the v button. The player verifiesthe network connection and thenconnects to the network.8. When verification is complete, selectOK, and then press the v button.✎ NOTES■ You should be able to find theSecurity Code or Pass Phrase on oneof the set up screens you used toset up your router or modem.Ğ Wireless - ManualIf you have a static IP address or theAutomatic procedure does not work, you'llneed to set the Network Settings valuesmanually.1. Follow the directions in Wireless -Automatic through Step 5.2. The player searches for a network, andthen displays the connection failedmessage.3. On the bottom of the screen, selectIp Settings, and then press the vbutton.The IP Settings screen appears.4. Select the IP Setting field, and thenpress the v button.5. Select Enter manually in the IP Settingfield, and then press the v button.6. Select a value to enter (Ip Address, forexample), and then press v button.Use the number keypad on yourremote control to enter the numbersfor the value. Use the ◀▶ buttonson the remote control to move fromentry field to entry field within a value.When done with one value, press thev button.7. Press the ▲ or ▼ button to move toanother value, and then enter thenumbers for that value following theinstructions in Step 6.8. Repeat Steps 6 and 7 until you havefilled in all values.✎ NOTES■ You can get the Network valuesfrom your Internet provider.9. When finished, and then press theRETURN or ExIT buttons. The SecurityScreen appears.10. On the Security screen, enter yournetwork's Security Code or PassPhrase. Enter numbers directly usingthe number buttons on your remotecontrol. Enter letters by selecting aletter with the ▲▼◀▶ buttons, andthen pressing the v button.11. When finished, select done at the rightof the screen, and then press the vbutton.The player verifies the networkconnection and then connects to thenetwork.12. After the player verifies the network,select OK, and then press the vbutton.Ğ WpS(pBC)1. In the Home screen, select Settings,and then press the v button.2. Select Network, and then press the vbutton.3. Select Network Settings, and thenpress the v button.4. Select Wireless in the Network Settingsscreen, and then press the v button.5. Press the ▲▼ button on your remote,and then press the ◀▶ button to selectthe WpS(pBC).6. Press the v button on your remote.The "Press the PBC button" messageappears.7. Press the WPS(PBC) button on yourrouter within two minutes. Your playerautomatically acquires all the networksettings values it needs and connectsto your network.The Network Status screen appears.The player connects to the networkafter the network connection is verified.Ğ WpS(pIN)Before you begin, open the router's setupmenu on your PC and access the screenwith the WPS PIN entry field.1. In the Home screen, select Settings,and then press the v button.2. Select Network, and then press the vbutton.3. Select Network Settings, and thenpress the v button.4. Select Wireless in the Network Settingsscreen, and then press the v button.The player searches for and thendisplays a list of the available networks.5. Select the desired network, and thenpress the ▶ button.6. Select the WpS(pIN), and then press thev button. The PIN pop-up appears.7. Enter the PIN into the WPS PIN entryfield in the router's Set Up screen andthen save the the screen.✎ NOTES■ Contact the manufacturer of therouter for instructions explaininghow to access the router's Set Upscreens or refer to the router'suser's manual.■ For WPS connection, set yourwireless router’s security encryptionto AES. WPS does not support WEPsecurity encryption.Network TestUse this menu item to check whether yournetwork connection is working or not.Network StatusUse to check whether a connection to anetwork and the Internet has been established.14