Samsung BD-E6100 User Manual

Also see for BD-E6100: User manual User manual User manual

Contents

Settings5. You have three ways to complete the Wi-Ficonnection:• Through the Wi-Fi device.• Through the player using PBC.• Through the player using a PIN.Each is covered below.Through the Wi-Fi Device1. On the Wi-Fi device, follow the procedure onthe device for connecting to another Wi-FiDirect device. See the device's user manualfor instructions.2. When you have completed the procedure,you should see a pop-up on your TV screensaying that a device that supports Wi-FiDirect has requested to connect. Select OK,and then press the v button to accept.3. The Connecting pop-up appears, followedby the Connected pop-up. When it closes,you should see the device listed on the Wi-FiDirect screen as connected.Through the Player Using PBC1. Select the Wi-Fi Direct device you want toconnect to this player, and then press the vbutton. The PBC/PIN pop up appears.2. Select PBC, and then press the v button.The PBC pop-up appears.3. Press the PBC button on the Wi-Fi Directdevice within 2 minutes.4. The Connecting pop-up appears, followedby the Connected pop-up. When it closes,you should see the device listed on the Wi-FiDirect screen as connected.Through the Player Using a PIN1. Select the Wi-Fi Direct device you want toconnect to this player, and then press the vbutton. The PBC/PIN pop up appears.2. Select PIN, and then press the v button.The PIN pop-up appears.3. Note the PIN code in the pop-up, and thenenter it into the appropriate field in the Wi-FiDirect device you want to connect.4. The Connecting pop-up appears, followedby the Connected pop-up. When it closes,you should see the device listed on the Wi-FiDirect screen as connected.| NOTE |\ The wired or wireless network connection will bedisconnected when you use the Wi-Fi Direct function.Soft APSoft AP is short for Software enabled AccessPoint.Soft AP lets you connect other Wi-Fi devices toyour network through the player and lets you canenjoy various features such as AllShare networkfunctionality or network remote control.It requires that you create a security key which youmust enter into the other Wi-Fi devices when youare connecting them to the network.1. In the Home screen, select Settings, andthen press the v button.2. Select Network, and then press the vbutton.3. Select Soft AP, and then press the vbutton.4. Select On or Off, and then press the vbutton.< To Set the Soft AP Security Key >1. On the Soft AP screen, select Security Key,and then press the v button. The SecurityKey screen appears.2. On the Security key screen, enter a securitykey. Enter numbers directly using the numberbuttons on your remote control. Enterletters by selecting a letter with the ▲▼◄►buttons, and then pressing the v button.3. When done, use the the ▲▼◄► buttons tomove to Done at the bottom of the screen,and then press the v button.When you connect a Wi-Fi device through theconnection procedure on the device, you mustenter the security key you created here into theappropriate field.| 28 English