Samsung BD-E5900 User Manual

Also see for BD-E5900: User guide Software guide Brochure

Contents

04 SettingsBy USB1. Visit www.samsung.com.2. Click SUppORT on the top right of the page.3. Enter the product's model number into thesearch field, and then click Find product.4. Click Get downloads in the center of thepage below the Downloads header.5. Click Firmware in the center of the page.6. Click the ZIp icon in the File column on theright side of the page.7. Click OK in the pop-up that appears todownload and save the firmware file to yourPC.8. Unzip the zip archive to your computer. Youshould have a single folder with the samename as the zip file.9. Copy the folder to a USB flash drive.10. Make sure no disc is inserted in the player,and then insert the USB flash drive into theUSB port of the player.11. In the player's menu, go to Settings >Support > Software Upgrade.12. Select By USB.| NOTE |\ There should be no disc in the player when you upgradethe software using the USB Host jack.\ When the software upgrade is done, check the softwaredetails in the software Upgrade menu.\ Do not turn off the player during the software upgrade.It may cause the player to malfunction.\ Software upgrades using the USB Host jack must beperformed with a USB flash memory stick only.By disc1. Follow Steps 1 through 7 in By USB.2. Unzip the zip archive to your computer. Youshould have a single folder with the samename as the zip file.3. Write the folder onto a disc. We recommenda CD-R or DVD-R.4. Finalize the disc before you remove it fromyour computer.5. Insert the disc into the player.6. In the player's menu, go to Settings >Support > Software upgrade.7. Select By disc.| NOTE |\ When the system upgrade is done, check the softwaredetails in the software Upgrade menu.\ Do not turn off the player during the Software Upgrade.It may cause the player malfunction.By downloadedThe By Downloaded option lets you upgradeusing a file the player downloaded earlier butyou decided not to install immediately or a filedownloaded by the player in Standby Mode.1. If upgrade software has been downloaded,you will see the software version number tothe right of By Downloaded.2. Select By downloaded, and then press thev button.3. The player displays a message asking if youwant to upgrade. Select Yes. The playerbegins the upgrade.4. When the update is complete, the playerturns off automatically, and then turns on.| NOTE |\ When the system upgrade is done, check the softwaredetails in the software Upgrade menu.\ Do not turn off the player during the software Upgrade.It may cause the player to malfunction.English 29 |