Samsung BD-E5900 User Manual

Also see for BD-E5900: User guide Software guide Brochure

Contents

SettingsNetworks and the InternetWhen you connect this player to a network,you can use network based applications andfunctions such as Smart Hub and BD-LIVE,and upgrade the player's software through thenetwork connection. For more information aboutaccessing and using Internet services, see theNetwork Services chapter of this manual on pages42~45. Instructions for configuring the networkconnection start below.Configuring Your Network ConnectionBefore you begin, contact your ISP to find outif your IP address is static or dynamic. If it isdynamic, and you have a wired or wirelessnetwork, we recommend using the Automaticconfiguration procedures described below.If you are connecting to a wired network, connectthe player to your router using a LAN cable beforeyou start the configuration procedure.If you are connecting to a wireless network,disconnect any wired network connection beforeyou begin.To begin configuring your network connection,follow these steps:1. In the Home screen, select Settings, andthen press the v button.2. Select Network, and then press the vbutton.3. Select Network Settings, and then press thev button.4. Go to the instructions for Wired networksstarting below or the instructions for Wirelessnetworks starting on page 25.Wired NetworkĞ Wired - AutomaticAfter following Steps 1 to 3 above:1. Select Start in the Network Settings screen,and then press the v button. The playerdetects the wired connection, verifies thenetwork connection and then connects to thenetwork.Ğ Wired - ManualIf you have a static IP address or the Automaticprocedure does not work, you'll need to set theNetwork Settings values manually.After following Steps 1 to 3 above:1. Select Start in the Network Settings screen,and then press the v button.The Network Status screen appears.The player attempts to verify the networkconnection and fails.2. Select Ip Settings on the right of the screen,and press the v button.The IP Settings screen appears.3. Select the Ip Mode field, and then set it toManual.4. Use the number keypad on your remote toenter the Network values. Use the ▲▼◄►buttons on the remote to move from entryfield to entry field.| NOTE |\ You can get these values from your Internet provider. Youcan also view these values on most Windows computers.For instructions, see "Getting the Network SettingsValues." on page 25.5. When done, highlight OK, and then pressv button. The player verifies the networkconnection and then connects to thenetwork.IP SettingsOKRetryPreviousNetwork SettingsWired network connection failed.Unable to connect to the network. Try the following:- check if your IP address is set correctly in IP Settings.- Contact your Internet Service Provider for more information.MAC Address XX:XX:XX:XX:XX:XXIP Address 0.0.0.0Subnet Mask 0.0.0.0Gateway 0.0.0.0DNS Server 0.0.0.0| 24 English