Samsung BD-C6900 User Manual

Also see for BD-C6900: User manual Available Apps Upgrade guide User manual User manual

Contents

0 EnglishSetupPress the 返回 button on your remote.Run a Network Test to ensure the product hasconnected to your network (See page 42 ).Wireless NetworkYou can setup the wireless connection three ways:Using PBC (WPS)Using the Auto Network Search function.Manually.Each method is described below.Setting Up the Wireless Network Connection- PBC (WPS)The easiest way to set up the wireless networkconnection is using the PBC (WPS) function.If your wireless router has a PBC (WPS) button,follow these steps:In the Network Settings menu, press the ▲▼buttons to select Network Settings, and thenpress the 确认 button.The Internet Protocol Setup screen appears.Press the 红色 (A) button on the remotecontrol.Press the PBC (WPS) button on your routerwithin two minutes. Your product displays theNetwork Selection Screen, and automaticallyacquires all the network setting values itneeds and connects to your network. Whenit is done, it displays an OK button. Press the确认 button on your remote.After the network connection is set up, pressthe 返回 button to exit the Network Settingscreen.9.10.•••1.2.3.4.Setting Up the Wireless Network Connection- Auto Network SearchMost wireless networks have an optional securitysystem that requires devices that access thenetwork to transmit an encrypted security codecalled an Access or Security Key. The SecurityKey is based on a Pass Phrase, typically a wordor a series of letters and numbers of a specifiedlength you were asked to enter when you set upsecurity for your wireless network. If you use thismethod of setting up the network connection, andhave a Security Key for your wireless network,you will have to enter the Pass Phrase during thesetup process.Setting Up the Network ConnectionTo set up the wireless connection using AutoNetwork Search, follow these steps:In the Network Settings menu, press the ▲▼buttons to select Network Settings, and thenpress the 确认 button.The Internet Protocol Setup screen appears.Press the ▲▼ buttons to select the InternetProtocol Setup, and then press the 确认button.Press the ▲▼ buttons to select Auto orManual, and then press the 确认 button.If you selected Auto, press the ▲ button togo to Access Point Selection, and thenpress the 确认 button.The Network function searches for availablewireless networks.When done, it displays a list of the availablenetworks.1.2.3.4.Network SettingSelect a network : Not SelectedInternet Protocol Setup : Auto \IP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS : AutoDNS Server : 0 0 0 0@ PBC(WPS) > Move " Enter ' Return