Samsung BD-C6500 User Manual

Contents

EnglishSetupCinema : Select this if you want to play2-channel movie sound over multi-channels.Music : Select this if you want to play 2-channelmusic sound over multi-channels.NOTEIf you are using HDMI receiver, this option isavailable when you set Digital Output setup as PCM.You can use this option with analog 7.1ch outputwhen you don’t use HDMI receiver.Speaker SettingSet the speaker sound to obtain the best possiblesurround sound.This menu is available only when using 7.1chanalog output.Test ToneA test tone will be sent to L ; C ; R ; RS ;RSB ; LSB ; LS ; LFE in order, so you canmake sure the speakers are set up correctly.The test tone can only be activated when nodiscs are in the unit.The test tone outputs through the 7.1 channelanalog outputs only.••✎▪▪•••HDMIIf your TV is not compatible with compressedmulti-channel formats (Dolby Digital, DTS), theplayer may output PCM 2ch downmixed audioeven though you set Bitstream(either Re-encodeor Audiophile) on your setup menu.If your TV is not compatible with PCM samplingrates over 48kHz, the player may output 48kHzdownsampled PCM audio even though you setPCM Downsampling to Off.Dynamic Range ControlYou can listen at low volumes but still hear dialogclearly.This is only active when a Dolby Digital signal isdetected.Auto : The Dynamic Range Control will be setautomatically based on the information providedby the Dolby TrueHD Soundtrack.On : When Movie soundtracks are played at lowvolume or from smaller speakers, the systemcan apply appropriate compression to makelow-level content more intelligible and preventdramatic passages from getting too loud.Off : You can enjoy the movie with the standardDynamic Range.Downmixing ModeSet whether to downmix the multi-channel audiointo fewer channels.Normal Stereo : Downmixes the multi-channelaudio into two channel stereo. Choose whenconnected to equipment that does not supportvirtual surround functions such as Dolby ProLogic.Surround Compatible : Downmixes multi-channel audio into surround compatible stereo.Choose when connected to equipment thatsupports virtual surround functions such asDolby Pro Logic.DTS Neo:6You can enjoy multi-channel sound from a simple2-channel audio source.Off : Outputs a 2-channel audio signal throughthe front speakers only.••••••••DisplayAudioSystemNetworkLanguageSecurityGeneralSupportSettingsSpeaker Setting< Change " Enter ' ReturnFront : LargeCenter : LargeSurround : LargeSurround Back : LargeSubwoofer : OnTest Tone : Off