30_ connectionsconnectionsCOnnECTing TO an aUDiO SYSTEM (2 CHannEL aMPLiFiEr)- gOOD QUaLiTYUsing the audio cables, connect the aUDiO (red and white) OUT terminals on the rear of the Blu-ray DiscPlayer to the aUDiO (red and white) in terminals of your Amplifier.Using the video signal cable(s), connect the HDMi, COMPOnEnT or ViDEO OUT terminals on the rear of theBlu-ray Disc Player to the HDMi, COMPOnEnT or ViDEO in terminal of your TV. (See pages 22~26)Turn on the Blu-ray Disc Player, TV and Amplifier.Press the input select button of the Amplifier to select the external input in order to hear sound fromthe Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks ofDolby Laboratories.Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patentsissued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD MasterAudio are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.1.2.3.4.M WhiteRedAudio cable2-Channel stereo amp
