Samsung 530 Series User Manual

Also see for 540: User manual User manual User manual Quick setup guide

~~II 0 0~ COMPONENT IN 1,2/ AV IN 1,2:When connecting to AV IN 1, thecolor of the AV IN 1 [Y/VIDEO] jack(Green) does not match the color ofthe video cable (Yellow).~ For better picture quality, theComponent connection isrecommended over the A/Vconnection.R·AUDIQ-LAUDIO OUTe®Connecting to an Audio Devicee®R-AUDIQ-LAUDIO OUTUsing an Optical (Digital) or Audio (Analog) Cable ConnectionAvailable devices: Digital Audio System, Amplifier, Home TheaterUsing a Component Cable: (up to 1D8Dp), Using an AudioNideo Cable: (48Di only)Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR~ DIGITAL AUDIO OUT (OPTICAL)• When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volumeof both the TV and the system.• 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.• When the receiver (Home Theater) is set to on, you can hear sound output from the TV's optical jack. Whenthe TV is receiving a DTV signal, the TV will send 5.1 CH sound to the Home Theater receiver. When thesource is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiverand is connected to the TV via HDMI, only 2 CH audio will be heard from the Home Theater receiver. If youwant to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STBsatellite receiver directly to an amplifier or Home Theater.~ AUDIO OUT: Connects to the audio input jacks on your amplifier/Home Theater.• When connecting, use the appropriate connector (sold separately).• When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust thevolume level with the amplifier's volume control.English 9