Advanced FeaturesMedia PlayEnjoy photos, music and/or movie files saved on aUSB Mass Storage Class (MSC) device.(SJ MENU IlIl -+ Application -+ Media Play(USB) -+ ENTER [3JI Connecting a USB Device1. Turn on your TV.2. Connect a USB device containing photo, music and/or movie files to theUSB jack on the side of the TV3. When USB is connected to the TV, popup window appears.Then you can select Media Play.TV Side Panel~ It might not work properly with unlicensed multimedia files.~ Need-to-Know List before using Media Play• MTP (Media Transfer Protocol) is not supported.• The file system supports FAT16, FAT32 and NTFS.• Certain types of USB Digital camera and audio devices may not be compatible with this TV.• Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-OnlyTransport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HOD (USB HUB are notsupported). Devices should be connected directly to the TV's USB port.• Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.SAMSUNG is not responsible for any data file damage or data loss.• Connect a USB HDD to the dedicated port, USB 1 (HOD) port.• Do not disconnect the USB device while it is loading.• The higher the resolution of the image, the longer it takes to display on the screen.• The maximum supported JPEG resolution is 15360X8640 pixels.• For unsupported or corrupted files, the IlNot Supported File Format" message is displayed.• If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.• MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management(DRM) is a technology that supports the creation, distribution and management of the content in an integrated andcomprehensive way, including the protection of the rights and interests of the content providers, the prevention of theillegal copying of contents, as well as managing billings and settlements.• If more than 2 PTP devices are connected, you can only use one at a time.• If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires highpower (more than 500mA or 5V) may not be supported.• If an over-power warning message is displayed while you are connecting or using a USB device, the device may notbe recognized or may malfunction.• If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.• If a USB HDD supports the energy saving mode, the energy saving mode may be automatically off.• If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.• If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list isnot played, connect the USB device to the PC, format the device and check the connection.• If a file deleted from the PC is still found when Media Play is run, use the lIEmpty the Recycle Bin" function on the PCto permanently delete the file.24 English