English - 1. Lift the cover at the back of the remote control upward as shown in thefigure.. Install two AAA size batteries.Make sure to match the "+" and "–" ends of the batteries with thediagram inside the compartment.. Replace the cover.Remove the batteries and store them in a cool, dry place if you won’tbe using the remote control for a long time.➣➣If the remote control doesn’t work, check the following:1. Is the TV power on?2. Are the plus and minus ends of the batteries reversed?3. Are the batteries drained?4. Is there a power outage, or is the power cord unplugged?5. Is there a special fluorescent light or neon sign nearby?➣Installing Batteries in the Remote ControlSwitching On and Offthe mains lead is attached to the rear of your set.1. Plug the mains lead into an appropriate socket.The standby indicator lights up on your set.. Press the button on your set.You also can press the POWER button or the tV button on the remote control to turn the TVon.The channel that you were watching last is reselected automatically. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control orbutton on your set.When you switch the set on for the very first time, you will be asked to choose language in which themenus are to be displayed.. To switch your set off, press the POWER button again.➣➣➣➣Your set can be placed in standby mode in order to reduce the power consumption. the standbymode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).1. Press the POWER button on the remote control.The screen is turned off and a red standby indicator appears on your set.. To switch your set back on, simply press the POWER , numeric buttons (0~9), tV button orchannel up/down ( / ) button again.Do not leave your set in standby mode for long periods of time (when you are away on holiday,for example).It is best to unplug the set from the mains and aerial.➣➣Placing Your television in Standby Mode
