English - 1Your set has several settings which allow you to controlpicture quality.1. To select the desired picture effect, follow the"Changing the Picture Standard" instructions number 1 to 3.(On page 15). Press the ▲ or ▼ button to select a particular item. Press theENtER button.. Press the ◄ or ► button to decrease or increase the value ofa particular item. Press the ENtER button.. Press the EXIt button to exit.♦ Backlight: Adjusts the screen brightness by adjusting theLCD backlight brightness. (0~10)♦ Contrast: Adjusts the lightness and darkness betweenobjects and the background.♦ Brightness: Adjusts the brightness of the whole screen.♦ Sharpness: Adjusts the outline of objects to eithersharpen them or make them more dull.♦ Colour: Adjusts the colours, making them lighter ordarker.♦ tint: Adjusts the colour of objects, making them more red orgreen for a more natural look.The adjusted values are stored according to the selected Picture mode.In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch)In PC mode, you can only make changes to "Contrast" and "Brightness". (40 inch)In TV, Ext., AV modes of the PAL system, you cannot use the "Tint" Function.You can return to the factory defaults picture settings by selecting the "Reset".(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 17)The energy consumed during use can be significantly reduced if the level of brightness of the pictureis reduced, and that this will reduce the overall running cost.Adjusting the Custom PicturePictureMode : Standard Backlight Contrast 9Brightness Sharpness 0Colour 0tint G 0 R 0Picture Options Reset : OK tVMove Enter Return▲Backlight▼Move Adjust Return
