Samsung 01945B-BD-C6900-XAC-0223 User Manual

Contents

English 05 SetupWired NetworkIn the Network Settings menu, press the ▲▼buttons to select Network Settings, and thenpress the ENTER button.The Internet Protocol Setup screen appears.Press the ► button, then select Auto orManual, and then press the ENTER button.Setting Up a Wired Connection - AutoIf you selected Auto, the Network Functionacquires and fills in the values for IP Address,Subnet Mask, etc., automatically.NOTEThis process can take up to five minutes.After the Network Function has acquired thenetwork values, press the RETURN button.Then, run a Network Test to ensure the playerhas connected to your network (See page 42).If the Network Function does not acquire thenetwork values or you selected Manual, go tothe directions for Manual Setup.1.2.1.✎▪2.3.Setting Up a Wired Connection - ManualIf the Auto Setting does not work, you’ll need toset the Network Setting values manually.To get the Network setting values from mostWindows computers, follow these steps:Right click the Network icon on the bottomright of the screen.In the pop-up menu, click Status.On the dialog that appears, click the Supporttab.On the Support tab, click the Details button.The Network settings are displayed.To enter the Network settings into your player,follow these steps:On the Internet Protocol Setup screen, pressthe ENTER button.Press the ▲▼ buttons to select Manual, andthen press the ENTER button.Press the ▼ button to go to the first entry field(IP Address).Use the number buttons on your remote toenter numbers.When done with each field, use the ► buttonto move successively to the next field.You can also use the other arrow buttons tomove up, down, and back.Enter the IP Address, Subnet Mask, andGateway values.Press the ▼ button to go to DNS.Press the ▼ button to go to the first DNSentry field. Enter the numbers as above.1.2.3.4.1.2.3.4.5.6.7.8.Network SettingInternet Protocol Setup : Auto \IP Address : 0 0 0 0Subnet Mask : 0 0 0 0Gateway : 0 0 0 0DNS : AutoDNS Server : 0 0 0 0> Move " Enter ' ReturnNetwork SettingInternet Protocol Setup : Manual \IP Address : 0 0 0 0Subnet Mask : 255 255 255 0Gateway : 0 0 0 0DNS : ManualDNS Server : 0 0 0 0> Move " Enter ' Return