English 04 ConnectionsCase 4 : Connecting to a TV (Video) - Good QualityUsing video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white)terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals ofyour TV.Turn on the player and TV.Press the input selector on your TV remote control until the “VIDEO” signal from the player appearson the TV screen.If you have set the player's remote control to operate your TV (See page 19), press the TVSOURCE button on the remote control and select VIDEO as the external source of the TV.NOTENoise may be generated if the audio cable is placed too close to the power cable.If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 24~26)The number and position of the terminals may vary depending on your TV set. Please refer to the user manual of your TV.If there is only one audio input terminal on the TV, connect it to the AUDIO OUT (right/white) terminal of the player.CAUTIONDo not connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyrightprotection systems and the picture will be distorted on the television.1.2.3.•✎▪▪▪▪!▪WhiteRed YellowAudio/Video cable
