Samson SERVO 600 Specification

Also see for SERVO 600: Owner's manual

Contents

power amplifier

Samson SERVO 600 Specification Manual pdf 1 page image

PROPRODUCT SPECIFICATION SHEETAMPLIFIERSTYPE:POWERAMPLIFIERSPRODUCT DESCRIPTIONSERVO 600 POWER AMPLIFIERSERIES CATEGORYSERVO 600 AMPLIFIERSFRONT PANELBACK PANELGENERAL DESCRIPTIONThe Samson Servo 600 stereo power amplifier hasbeen designed to provide robust, clean output withlow distortion and wide dynamic range, along withthe dependability demanded by the most professionalaudio engineers and installers.The convenient 2 rack-space design is compact,and yet there’s plenty of power available, with 2 x225 Watts at 8Ω, 2 x 300 Watts at 4Ω over the fullfrequency spectrum, from 10 Hz to 55 kHz.For mono applications, a Bridge mode links bothchannels of the amplifiers, thus providing even moresingle channel power, with a power rating of 600 wattsinto an 8 Ohm load.Input connections are available for both unbalanced RCAconnections and balanced 1/4-inch TRS connections.For the outputs, the Servo 600 amplifier providesstandard 5-way binding posts and 1/4” phone jacks.Front-panel controls and displays include a powerswitch with LED indicator, as well as independent leftand right channel input level controls. To help you setthe correct operating levels, the Servo 600 amplifierincludes front panel Signal, Peak and Protection LEDindicators. There's also a ten-segment VU meter tohelp you set a good operating level.Like all serious power amplifiers, the Servo 600’s internalelectronics are based around a serious power-core,with an over-sized toroidal transformer and largeextruded heat sink. To keep the Servo 600 amplifierrunning cool, the design employs twin internal wind tunnelswith forced-air cooling via two temperature-sensitive, variablespeed fans, which greatly reduce the chance of thermal andoverheating problems. Multi-stage protection for power-up, over-heating, over-current, short circuit, low outputimpedance and DC voltage, assures high reliability under themost demanding situations.The Servo 600 amp is road tough with its all steel chassis and19-inch rack mount design. The Servo 600 amplifier is readyfor a life on the road, or to make its home in a fixed installation.Optimized for live sound venues, houses of worship, commercialinstallations, and for driving small and medium-sized live PAsystems, the Servo Series amplifiers will deliver reliable powerfrom gig-to-gig, venue-to-venue and day-to-night.FEATURES> Power to spare - 2 x 225 Watts at 8Ω, 2 x 300 Watts at 4Ω> For mono applications, a Bridge mode links both channelsof the amplifiers, thus providing even more power, with apower rating of 600 watts driving an 8 Ohm load.> Clean, crisp sound - Impressive audio specifications suchas 0.04% THD, dynamic range of 105 dB, crosstalk of 80dB, and frequency response of 10 Hz to 55 kHz guaranteeultra-clean sound quality.> Independent input level controls for each channel allowprecision adjustments.continues»©2006 Samson v1.0 5/06

/ 2

Related manuals for Samson SERVO 600