Samson SERVO 300 Specifications

Also see for SERVO 300: Owner's manual

Contents

power amplifier

Samson SERVO 300 Specifications Manual pdf 1 page image

PROPRODUCT SPECIFICATION SHEETAMPLIFIERSTYPE:POWERAMPLIFIERSPRODUCT DESCRIPTIONSERVO 300 POWER AMPLIFIERSERIES CATEGORYSERVO AMPLIFIERSGENERAL DESCRIPTIONThe Samson Servo 300 stereo power amplifier hasbeen designed to provide robust, clean output withlow distortion and wide dynamic range, along withthe dependability demanded by the most professionalaudio engineers and installers.Their convenient 2 rack-space design is compact,and yet there’s plenty of power available, with 2 x100 Watts at 8Ω, 2 x 150 Watts at 4Ω over the fullfrequency spectrum, from 10 Hz to 55 kHz.For mono applications, a Bridge mode links bothchannels of the amplifiers, thus providing even moresingle channel power, with a power ratings of 300watts into an 8 Ohm load.Input connections are available for both unbalancedRCA connections and balanced 1/4-inch TRSconnections. For the outputs, the Servo 300 amplifierprovides standard 5-way binding posts and 1/4˝phone jacks. Front-panel controls and displaysinclude a power switch with LED indicator, as well asindependent left and right channel input level controls.To help you set the correct operating levels, the Servo300 amplifier includes front panel Signal, Peak andProtection LED indicators. There's also a ten-segmentVU meter to help you set a good operating level.Like all serious power amplifiers, the Servo 300’sinternal electronics are based around a serious power-core, with a over-sized toroidal transformer and largeextruded heat sinks. To keep the Servo 300 amplifierrunning cool, the design employs twin internal wind tunnelswith forced-air cooling via two temperature-sensitive, variablespeed fans, which greatly reduce the chance of thermal andoverheating problems. Multi-stage protection for power-up,over-heating, over-current, short circuit, low output impedanceand DC voltage, assures high reliability under the mostdemanding situations.The Servo 300 amp is road tough with its all steel chassis and19-inch rack mount design. The Servo 300 amplifier is readyfor a life on the road, or to make its home in a fixed installation.Optimized for live sound venues, houses of worship, commercialinstallations, and for driving small and medium-sized live PAsystems, the Servo Series amplifiers will deliver reliable powerfrom gig-to-gig, venue-to-venue and day-to-night.FEATURES> Power to spare - 2 x 100 Watts at 8Ω, 2 x 150 Watts at 4Ω> For mono applications, a Bridge mode links both channelsof the amplifiers, thus providing even more power, with apower rating of 300 watts driving an 8 Ohm load.> Clean, crisp sound - Impressive audio specifications suchas 0.04% THD, dynamic range of 105 dB, crosstalkof 80 dB, and frequency response of 10 Hz to 55 kHzguarantee ultra-clean sound quality.> Independent input level controls for each channel allowprecision adjustments.continues»FRONT PANELBACK PANEL©2006 Samson v1.0 5/06

/ 2

Related manuals for Samson SERVO 300