Razor Pocket Rocket 15120040 Owner's Manual

Also see for POCKET ROCKET: Battery installation instructions Owner's manual Installation guide

Contents

Razor Pocket Rocket 15120040 Owner's Manual Manual pdf 3 page image

Remove contents from box. Remove the foam separators that protect the components from damage duringshipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may haveoccurred during shipping. Because the Pocket Rocket is 95 percent assembled and packed at the factory,there should not be any problems, even if the box has a few scars or dents.MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANYMAINTENANCE PROCEDURES.estimated assembly and set-up TimeRazor recommends assembly by an adult with experience in bicycle mechanics.Allow up to 15 minutes for assembly, not including initial charge time.Allow up to 18 hours for initial charge (see page 3 for charging information).BefOre yOu BegIn2warnIng:Do not use your Pocket Rocketfor the first time until you havecharged the battery for at least18 hours. Failure to do so maydamage your product and voidyour warranty.DO NOT USE NON-RAZORPRODUCTS WITH YOUR RAZORPOCKET ROCKET. The PocketRocket has been built to certainRazor design specifications. Theoriginal equipment supplied atthe time of sale was selectedon the basis of its compatibilitywith the frame, fork and allother parts. Certain aftermarketproducts may or may not becompatible.required Toolsneed Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call toll-freeat 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.5mm and 6mmhexagonal key wrenches(Included)2.5 mm hexagonal keywrench(Not Included)Bicycle-style tire pump forSchrader valve tires, withpressure gauge(Not Included)8mm, 10mm and 17mmwrenches(Not Included)Phillips screw driver(Not Included)