Radionics D10024A User Manual

Radionics D10024A User Manual Manual pdf 16 page image

D8024/D10024ALevel 2 Control FunctionsD8024/D10024A User Manual50618B Page 16 © 2002 Radionics5.3 Fire Alarm Conditions• The panel will indicate a fire alarm condition if it detects an alarm condition of if the FIRE DRILL key ispressed.5.3.1 Fire Alarm Indications• If the control panel initiates an alarm condition, the ALARM LED Indicator will be illuminated and, ifappropriate, the relevant ZONE ALARM LED Indicators will flash. The internal buzzer will sound and thealphanumeric display will give detailed information regarding the fire alarm location.• To test the alarm system, or to evacuate the building, press the FIRE DRILL key. The panel will activate allthe NAC output circuits, will illuminate the ALARM LED Indicator and the alphanumeric display will indicatea ‘Fire Drill’.5.3.2 User Actions• Press the TROUBLE SILENCE key to acknowledge the event and to turn off the internal buzzer. TheTROUBLE SILENCED LED is turned on.• Press the ALARM SILENCE key to silence the NAC output circuits. The SOUNDERS SILENCED LED isturned on. Press the ALARM SILENCE key again to reactivate the NAC outputs.• Press the SYSTEM RESET key to reset the system.5.4 User Option Functions• The optional functionsavailable to the user at Level2 are shown in Table 6.Function DescriptionCommission This option is not available to Level 2 users. It requires the entry of the Level3 password before the programming mode can be entered.Test Allows the user to test parts of the system. The following tests can beperformed:LED To test the LED indicator lamps. This test will automatically testeach zone indicator and then terminate.LCD To test the alphanumeric display.ZONES To perform a ‘Walk Test’ on one or more zones.OUTPUTS To test the relay and NAC outputs connected to thesystem. This test is only available to Level 3 users.Time To change the date and time in the panel.Enable To enable zones, inputs, outputs, keys and day mode operation.Disable To disable zones, inputs, outputs, keys and day mode operation.Print To print various reports on an internal or remote printer.View To view devices and system status conditions.Table 6: User Menu Options5.4.1 Test• To display the Test Menu,press [2] and the displayshows:• The test menu allows the user to test:- The LEDs on the front panel display- The alphanumeric (liquid crystal) display- The detection and alarm initiating devices connected to the signaling loop.- The NAC outputs and other alarm condition output devices connected to the system