91FLASH EXPOSURE COMPENSATIONIt is possible to compensate the flash output level without changing thebackground’s exposure.The Flash Exposure Compensation can be set from [ Capture Settings](P.28) → [Flash] → [Flash Exposure Compensation].Select the desired compensation value by using the buttons. Flash Exposure compensation can be set in 1/3 stop increments from+3.0 to -3.0 stops. When the Flash Exposure Compensation is set, the iconand compensation value will be displayed on the left ofthe LCD monitor.CAUTION!! The flash exposure compensation can not be set if the flashgun is notattached to the camera, or the flashgun is turned off. The flash exposure compensation will not disable automatically. Aftertaking the picture, set the compensation value to ±0.0 by aboveprocedure.
