QNAP HS-210 Hardware User Manual

Also see for TS-863U: Hardware user manual Hardware user manual Hardware user manual User manual

Contents

QNAP HS-210 Hardware User Manual Manual pdf 36 page image

36Chapter 3. USB One Touch CopySystem Number of seconds (press the one touch copy button totrigger data copy)All NAS models 0.5 secData Copy by the Front USB PortThe NAS supports instant data copy backup from the external USB device to the NAS or theother way round by the front one touch copy button. To use this function, follow the stepsbelow:1. Make sure a hard drive is installed and formatted on the NAS. The default networkshare Qusb or Usb is created.2. Turn on the NAS.3. Configure the behavior of the Copy button on “Backup” > “USB one touch copy” page.4. Connect the USB storage device to the front USB port of the NAS.5. Press the Copy button. The USB LED will flash. The data will be copied to or from theUSB device according to the NAS settings.Note: This feature adopts incremental backup. After the first time data backup, the NAS onlycopies the changed files since the last backup. This feature is only available on certain NAS models. Please refer to the productspecification table for details at www.qnap.com.