Pioneer XW-NAS5 Operating Instructions Manual

Also see for XW-NAS5: Operating instructions

Using the timer 0821EnEnglish FrançaisDeutsch NederlandsItaliano Español1 With input set to iPod or tuner, pressSETUP .2 Use / to select ‘ ’, then pressENTER.Timer setting time is displayed.3 Set the desired time for the timer.Use / to set the hour, then press ENTER.Set the minute in the same way, pressingENTER when you’re done.4 Use / to select the input source to beused as the timer sound, then press ENTER .While selecting the input source, the soundfrom that source will be audible (except whenbeep is selected). Use the VOLUME +/–buttons to adjust the sound volume.• If is selected, an electronic tone willsound.5 Use / to set the snooze function toON/OFF as desired, then press ENTER.The timer time, input setting, snooze setting,and volume setting will be displayed in order,thus completing the wake-up timer setting.• The timer indicator lights.When the wake-up timer soundsIf the snooze function is OFF:Press the main unit’s  STANDBY/ON buttonto stop the timer playback and turn power off.Alternately, wait for one hour (when beep isselected, wait for one minute) and playback willstop automatically and power will turn off.If any other button is pressed, the timerplayback stops and normal playback of thecurrently selected input source will begin.• When finished using the timer, set thetimer function to OFF (see below).If the snooze function is ON:Press the main unit’s  STANDBY/ON buttonto stop the timer playback and turn power off.If any other button is pressed or playbackcontinues for one minute, the timer sound willstop, but the snooze function will operate andfive minutes later the timer sound will playbackagain.• While the snooze function is operating, nobuttons can be used other than WAKE UPand the main unit’s  STANDBY/ON. (Toturn the timer function OFF, press theWAKE UP button two times.)• The snooze function repeats up to fivetimes. After that, the unit’s power turns offautomatically.• When finished using the timer, set thetimer function to OFF (see below).Turning the wake-up timer on/off• Press WAKE UP .Each time the button is pressed, the timerfunction switches alternately to ON/OFF.• When the timer is set to ON, the timerindicator lights.Using the sleep timerThe sleep timer switches off the unit after aspecified time so you can fall asleep withoutworrying about it.• Press SLEEP repeatedly to select a switch-off time.Choose between 5 min, 15 min, 30 min, 60 min,90 min or Off.• The remaining time is displayed while thesleep timer operates. 1Note1 The sleep timer can be reset by pressing the SLEEP button while the sleep timer is operating.