Pioneer XW-NAS5 Operating Instructions Manual

Also see for XW-NAS5: Operating instructions

Contents

Using the tuner0618EnChapter 6:Using the tunerConnect the FM antennaConnect the FM antenna plug onto the center pinof the FM antenna socket. 1Listening to the FM radioThe tuner can receive FM broadcasts, and letsyou memorize your favorite stations so youdon’t have to manually tune in every time youwant to listen.1 Press INPUT to switch to the tuner.The tuner indicator will light, and the tunedfrequency will be displayed.2 Tune to a station.There are three ways to do this:Automatic tuning – To search forstations, press and hold TUNE +/– forabout a second. The receiver will startsearching for the next station, stoppingwhen it has found one. Repeat to search forother stations.Manual tuning – To change the frequencyone step at a time, press TUNE +/–.High speed tuning – Press and holdTUNE +/– for high speed tuning. Releasethe button at the frequency you want.Memorizing stationsYou can save up to 10 station presets so thatyou always have easy access to your favoritestations without having to tune in manuallyeach time. 21 Press INPUT to switch to the tuner.2 Tune to an FM radio station.3 Press TUNER PRESET .4 Use TUNE +/– to select the station presetyou want (e.g., ‘ ’) then press ENTER.Listening to station presets1 Press INPUT to switch to the tuner.2 Use PRESET +/– to select a station preset.Note1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.AC IN FM UNBAL 75ANTENNAFM wire antennaSTANDBY/ONINPUTPRESET PRESETENTERSLEEPCLOCK SETUPWAKEUPTUNERPRESETBASS /TREBLETUNETUNE2 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency willbe overwritten with the new one.