Pioneer Steez STZ-D10Z-R Operating Instruction

Also see for Steez STZ-D10Z-R: Operating instructions

27EnConfigure the power saving settingsBy configuring the power saving settings, you can save the battery’s power and reduce the amount of power used.To configure the power saving settings, select Power Save in the Setup menu.You can set Display Off, Auto Power Off and Key Light Off separately for when operating by battery or AC adapter.Settings for batterypowered useSettings for AC adapterpowered usePower SaveBatteryBatteryAC PowerBatteryDisplay OffDisplay Off 30 sec.Auto Power Off YesKey Light Off 5 sec.AC PowerDisplay OffDisplay Off 30 sec.Auto Power Off YesKey Light Off 5 sec.See the table below for the options available for each setting. The defaults, if not stated, are listed in bold.Setting What it does Option(s)Display OffThe display screen will turn off when no activity takes place on the device for a speci-fied amount of time.! When the display screen is turned off, you can press any button to turn it back on.No (Don’t turn off the display screen)5 sec. (5 seconds)10 sec. （10 seconds）30 sec. （30 seconds）Auto Power Off You can configure the device so that the power turns off automatically (standby) ifthere is no activity or playback is stopped for five minutes.NoYesKey Light Off You can configure the device so that the key lights turn off automatically 5 secondsafter the last operation.No5 sec.Configuring the display settingsTo configure the display brightness, select Display in the Setup menu. You can select from Light / Dark.DisplayBrightnessBrightness LightConfirming the device informationBy selecting Information in the Setup menu, you can display Software (the device’s software version), Total Track (the total number of tracks saved),and Used/Remain (memory used/available).InformationSoftware: *.**Total Track: ***Used/Remain: *.*GB/1.5GBResetting the deviceTo entirely restore the device back to the factory default settings, select Reset Setting in the Setup menu.Reset SettingNoNoYes% Choose Yes and then select ENTER.When Power will turn off automatically. is shown and the device’s power turns off (standby), resetting is complete.